Alto Mixpack Express 350w Portable Powered PA System
The Alto 350W MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 800W MIXPACK and 1200W MIXPACk Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and DSP effects in one place. Set up & play in minutes!
MIXPACK Express comes complete with two 10'' speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS (1/4 Jack) and unbalanced RCA (Phono) so no matter what you need to connect, you're all set. MIXPACK Express also includes two mic cables and two speaker cables in the package. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.
The built-in mixer on MIXPACK Express has 7 input channels with 16 DSP, (Digital Sound Processor) presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, REV ＋ DELAY and REV ＋ CHORUS combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.
If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the Alto MIXPACK and Alto MIXPACK Pro.
•Microphone/Line Input Electronically balanced, discrele input configuration
•Frequency Response 10Hz to 55kHz, ＋/－3dBu
•Microphone Input Impedance: 3.9kΩ
•Line Input Impedance 10kΩ
•Microphone Input S/N ratio ＞94dBu
•Microphone Inputs Balanced XLR connectors
•Line Inputs Balanced / Unbalanced, 1/4' (6.3mm) TRS jack connedctors
•Tape Inputs Unbalanced RCA jack
•Inputs Distortion ( THD & N) 0.04% at 0dBu, 1KHz
•Channel EQ High shelving + / -15dB @12KHz Low shelving + / -15dB @80Hz
•Aux Send 1 with paths for DSP internal section, external DSP section and Monitor Out
•DSP Section 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV ＋ DELAY and REV ＋ CHORUS combinations
•Master Section Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
•Output Master EQ 7-band, ＋/－15dB@ 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.3kHz, 16kHz
•Monitor Section Master Level knob, 4 LEDs level meter, and 1/4'' (6.3mm.) MONITOR OUT jack.
•System Type 2-way Coax Vented box
•Frequency Response 65Hz-20kHz at －10dB
•Spherical horn Coverage 70° H × 70° V
•Continuous Power 150Watt AES Standard
•Peak Power 300Watt Peak
•Protection Electronic circuit on driver
•Speaker Specification 10'' (254mm) Low Frequency Driver / 2'' (50.8mm) Voice Coil, 1'' (25.4mm) Neodymium High Input Connectors 1/4'' (6.3mm.) mono (TS) jack on each cabinet.
•Output Power 350W (EIAJ)
•Protections Overload/Short Circuit/ Soft Clip Limiter/ Thermal Protection
•2 speakers cables
•1 power cord
•2 microphone cables
- Portable Powered PA Sound System
- Two 10” speakers with 350 WATT continuous power
- Mixer with digital effects, 7-band graphical EQ and XLR, Line and RCA (Phono) inputs
- Lightweight, one-piece design for convenient transport
- microphone and speaker cables included
- Microphone Inputs Balanced XLR connectors
- DSP Section 24-bit effects including HALL, ROOM, VOCAL, PLATE REVERB
- STEREO DELAY, REV + DELAY and REV + CHORUS combinations, //